Toilet repair and replacement
Most toilet complaints trace to a short list of causes. A toilet that runs on and off usually has a worn flapper or a fill valve that no longer shuts off cleanly. A weak flush often points to mineral buildup in the rim holes or a low water level in the tank. A toilet that rocks, or leaves water around the base, has a failed wax ring or loose closet bolts, and the floor beneath it deserves a look before anything is reset.
- Constant hissing or refilling: check the fill valve and flapper.
- Repeated clogs: could be a partial blockage deeper in the drain, not just the bowl.
- Water at the base: stop using it and have the seal and subfloor checked.
- Cracks in the porcelain or frequent repairs: replacement often makes more sense than another repair.
Shower and bathtub plumbing problems
Showers and tubs fail in a few predictable ways. Low flow from the showerhead is frequently scale, which is common where water is hard. A shower that swings between hot and cold usually has a worn mixing cartridge. A tub that drains slowly is typically hair and soap collecting in the stopper assembly or the trap.
Be cautious about leaks behind the wall. A stain on the ceiling below, soft drywall or a musty smell can mean water is escaping from a valve body or drain connection. That needs attention sooner rather than later, because moisture inside a wall does damage quietly.
Bathroom sink and faucet repairs
A dripping faucet wastes water and wears out its seat over time. Depending on the style, the fix is a cartridge, washer or seal. If the faucet is old and parts are hard to find, replacing it is often simpler. Under the vanity, look at the supply lines and shutoff valves. Stiff valves that will not close fully are a good reason to replace them while the faucet is out.
A sink that gurgles or drains slowly may have a clog in the trap, or a venting problem further along. A plumber can tell which by how the other fixtures behave.
Bathroom plumbing for renovations
A remodel is the cheapest moment to fix hidden plumbing, since the walls and floor are already open. Plan the fixture locations first, because moving a toilet or shower drain changes the drain slope and may involve the floor framing. Check the shutoff valves, replace old supply lines, and confirm that the drain and vent sizes suit the new fixtures.
Local building departments often require permits and inspections for moved or new plumbing. Ask yours what applies before work begins.
- Decide on fixture locations and sizes.
- Open the walls or floor and inspect existing pipes.
- Update shutoff valves, supply lines and drain connections.
- Pressure test and check for leaks before closing everything up.
When to call Rocket
Rocket is a locally owned father-and-sons team from West Jordan. For a bathroom leak that will not stop, call during emergency hours, which Rocket lists as 24/7. For a planned repair or remodel, regular hours are Monday through Friday, 7am to 5pm.
Frequently asked questions
Why does my toilet keep running?
The usual causes are a flapper that no longer seals or a fill valve that fails to shut off. Either lets water leak from the tank into the bowl, so the toilet refills over and over.
Is a slow bathtub drain a plumbing emergency?
Usually not. It is most often hair and soap in the stopper or trap. If several fixtures drain slowly together, the problem is deeper in the line and worth a call.
Should I repair or replace an old faucet?
If it is a simple drip and parts are available, repair is reasonable. Corroded bodies, worn finishes or repeated repairs usually point toward replacement.
Can a bathroom be moved during a remodel?
Often yes, but drains need correct slope and venting, which depends on your framing. A plumber should look at the space before you finalize a layout.
What if I see water stains under the bathroom?
Shut off the water to the fixture if you can, and call. Hidden leaks cause damage over time, and the source is not always above the stain.
