Kitchen sink and faucet repairs
Start by finding where the water shows up. A drip from the spout points to the faucet cartridge or seals. Water pooling in the cabinet could come from the faucet base, the supply lines, the shutoff valves or the drain connections, and each needs a different fix. Running a paper towel along the fittings with the water on will often show which joint is wet.
Pull-down sprayers lose pressure when the hose or its weight snags, and when scale clogs the aerator at the tip. Unscrewing the aerator and cleaning it is a safe first check. If the faucet body is corroded or the finish is failing, replacement usually costs less in labor than repeated repairs.
Dishwasher and refrigerator water connections
Appliance connections are small parts that cause big water damage. A dishwasher takes hot water from a supply line under the sink and drains through a hose that usually loops high before reaching the disposal or the sink drain. A fridge with an ice maker or water dispenser uses a thin supply line, often tucked behind the appliance where leaks go unnoticed.
- Replace brittle or kinked supply lines when you replace an appliance, rather than reusing old ones.
- Make sure each line has its own working shutoff valve.
- A dishwasher that leaves standing water may have a blocked drain hose or air gap.
- Check the floor near the fridge for soft spots or discoloration, which can reveal a slow leak.
Kitchen drain problems
Kitchen drains clog differently from bathroom drains. Grease cools inside the pipe and coats the walls until a narrow channel is all that remains, and then a bit of food scrap closes it. Chemical drain cleaners can harm older pipes and are unsafe if the clog does not clear, because the standing liquid is hazardous to handle.
If the sink backs up into the second basin, the blockage is in the shared trap or just beyond it. If the dishwasher or other fixtures also back up, the problem is further down the line. A plumber can clear it with a cable or hydro jetting, depending on what the line needs.
Kitchen plumbing upgrades
Kitchen remodels are a good time to update old shutoff valves, replace brittle supply lines and check the drain layout. Moving a sink, adding a pot filler or putting in an island sink changes drain and vent requirements, so confirm the plan with a plumber before cabinets are ordered. Adding a filtered water tap or a second dishwasher also needs a plan for supply and drain connections.
Salt Lake Valley homes with sinks on exterior walls should watch for freeze risk. Keep cabinet doors open on very cold nights and make sure insulation is intact.
- List the fixtures and appliances you want in the new layout.
- Have the existing shutoffs, supply lines and drains inspected.
- Confirm drain and vent changes before cabinetry goes in.
- Test every connection under pressure before closing up.
Why call Rocket
Rocket is a local father-and-sons business, and you can schedule a kitchen visit online or by text. Emergency hours are listed as 24/7 for leaks you cannot stop.
Frequently asked questions
Why is there water under my kitchen sink?
It can be the faucet, supply lines, shutoff valves or drain fittings. Dry the area, run the water and watch each joint to find the source. If you cannot find it, have a plumber check.
Is it safe to use chemical drain cleaner in the kitchen?
It is risky. It can damage pipes and leave hazardous standing liquid if it does not work. A cable or professional cleaning is the safer route for a stubborn clog.
How do I know a dishwasher line is leaking?
Look for dampness at the supply connection under the sink and at the hose connections. Warped flooring near the dishwasher is a later sign.
Can I add a second sink to my kitchen?
Usually, but it needs supply, drain and vent connections. Layout and wall location decide how involved the work is.
