Safe, permitted, inspected work
That phrase is the heart of how Rocket approaches custom projects. A custom project is anything beyond a routine repair or replacement: something new, something relocated or something that has to be designed around your property. Because the job is unusual, there is more room for shortcuts, and that is exactly where problems start.
Water and gas systems behind walls, under yards and inside outdoor structures have to be right the first time. A permit puts the plan on record, an inspection puts a qualified person from your city to look at the finished work, and the result is a system you can trust and a home that has a paper trail. Rocket pulls the permits, the city comes out and inspects, and the work is done to be safe and compliant with code.
- Safe: built to protect your family, your property and the people who use it
- Permitted: the plan is filed with your city or county before work begins
- Inspected: the city comes out and looks at the finished work
- Documented: you end up with a record that the job was done properly
What counts as a custom plumbing or gas project
The category is broad on purpose. If you have an idea that involves water or gas in a new place, or in a way a standard service does not cover, it probably qualifies. The first conversation is simply about what you want and what the property allows.
Some projects are mostly plumbing, some are mostly gas and some combine both. A technician looks at what is already in place, what the project needs and what the city will want to see, and then lays out a plan.
- A new gas line to a backyard BBQ or a gazebo
- Water and drain lines for an added sink or utility area
- Moving fixtures or appliances to a different part of the house
- Plumbing and gas for a remodel, an addition or a converted space
- A project that combines gas, water and drainage in one location
Example: a backyard gazebo with a gas BBQ
A backyard gazebo set up for a BBQ shows how these projects work. The structure may be freestanding, which means a gas line has to travel from the house or the meter across the yard to a spot where the grill will sit. That means trenching or routing the pipe, protecting it, sizing it for the appliance and making a safe connection at the end.
None of that is a weekend task. It involves gas, so it calls for a permit and an inspection. Rocket plans the route, pulls the permit and builds the line, then the city inspects it before the grill is put into service. The homeowner enjoys a finished backyard, and the work behind it has been checked by someone whose job is to check it.
- You describe the layout and what you want to cook on or run in the space.
- A technician looks at the yard, the existing gas supply and the likely route.
- The plan is settled and the permit is pulled.
- The line is installed and connected at the appliance location.
- The city inspects the work and any corrections are made.
- The system is put into service once it has passed.
How permits and city inspections work
Every city and county in the valley runs its own permit process, and requirements can differ from one to the next. In general, the permit is requested before work starts, the work is done to code and an inspector comes to confirm it. If something is not right, it gets corrected and looked at again.
You do not need to navigate that yourself. Rocket handles the permit side and schedules the inspection. If you want to understand the rules for your address, your city or county building department is the place to confirm them.
Planning a custom project
Good projects start with a clear picture of what you want and a realistic look at the site. Bring photos, a rough sketch or just a description. The more a technician knows about the layout, the easier it is to say what is practical.
Think about timing too. Permits and inspections add steps, and outdoor work in Utah is shaped by the seasons, since frozen ground and winter weather can limit what is practical at certain times of year. Starting the conversation early gives you the most flexibility.
- Gather photos and a description of the space
- Think about which appliances or fixtures will use the new lines
- Ask what the permit will cover and when inspection happens
- Plan around seasons if the work is outdoors
Why call Rocket for a custom project
Rocket is a West Jordan company run by Bill Bashford and his sons, and you can schedule online, call or text. If you have a project that does not fit a standard category, call and describe it.
Frequently asked questions
Do custom projects need permits?
Most do, especially anything involving gas or new water and drain lines. Rocket pulls the permits and the city inspects. Confirm local requirements with your building department.
Who pulls the permit?
Rocket handles the permit for the work it does, so you do not have to navigate the process yourself.
Can you run gas to a backyard gazebo?
Yes, that is the kind of project Rocket takes on. It involves a permit, a properly sized line and a city inspection before the grill goes into use.
What if I am not sure my project is possible?
Call and describe it. A technician can look at your site and explain what is practical and what the city will want to see.
Why does inspection matter?
An inspector from your city checks the finished work independently. For gas and water, that second look is a safeguard for your family and your home.
